SAGEM-LINK F 288055571-04
Installation and Operation Manual
Page 93/142
Issue 04 : July 2005
Reproduction and communication prohibited without the written permission of Sagem Communication
Quality upon G821
With :
ES = number of errored seconds
IS = number of unavailable seconds
SE = number of seriously errored seconds
IP = number of unavailable periods
ESR = rate of errored seconds over the measuring period
SESR = rate of seriously errored seconds over the measuring period
ISR = rate of unavailable seconds over the measuring period
G826 Report
With
ES = number of errored seconds
IS = number of unavailable seconds
BBE = number of residual errored blocks, i.e. errored blocks coming outside the seriously errored
seconds (SES)
ESR = rate of errored seconds over the measuring period
SESR = rate of seriously errored seconds over the measuring period
BBER = rate of residual errored blocks over the measuring period
3.3.7.5 - Interleaver
Refer to section 3.2.4.8.
To Next Page
Loading...