Modules & Options
PC Camera 7 - 3
7
PC Camera Driver Installation
1. Make sure the module is powered on (click Cancel if you see a “New
Hardware Found” message), and then insert the Device Drivers & Utilities
+ User’s Manual CD-ROM into the CD/DVD drive.
2. Double-click Camera.
OR
Click Start (menu) > Run... and navigate (Browse...) to
D:\Drivers\Camera\Setup.exe and click OK.
3. Choose the language you prefer and click OK.
4. Click Next > Finish to restart the computer.
5. Run the BisonCap application program from the BisonCam shortcut on the
desktop or from the BisonCam item in the Start > Programs/All Pro-
grams menu (if the hardware is turned off use the Fn + F10 key combina-
tion to turn it on again).
6. You can use the application hot key to run the BisonCap application if
you have installed the hot key driver (“Hot Key” on page 4 - 10).
7. A Snapshot folder will be placed on the desktop to record still pictures
taken with using the application hot key (see sidebar and “PC Camera
Hot Keys” on page 7 - 8).
Stand by/Hibernate
or Shutdown Error
The computer may stop
responding when you
put it into (or resume
from) Stand By or Hiber-
nate, or when you shut
down.
This error is caused by
power management
within Windows XP,
when applied to a PC
Camera attached to the
internal USB hub.
Microsoft has posted a
Hotfix for this error on its
website (search for Hot-
fix KB909667).
Download and install the
Hotfix to correct this er-
ror.
To Next Page
Loading...