BIOS Utilities
Security Menu 5 - 9
5
Set User Password (Security Menu)
You can set a password for user mode access to the Setup utility. This will not affect
access to the computer OS (only the Setup utility). Many menu items in the Setup
utility cannot be modified in user mode. You can only set the user password after
you have set the supervisor password.
Note: To clear existing passwords press Enter and type the existing password, then
press Enter for the new password (without typing any password entry) and Enter
again to confirm the password clearance.
Password Warning
If you set a boot pass-
word (Password on boot
is “Enabled“), NEVER
forget your password.
The consequences of
this could be serious. If
you cannot remember
your boot password you
must contact your ven-
dor and you may lose all
of the information on
your hard disk.
To Next Page
Loading...