User Manual
13
4.4 Optional Anti-Theft Protection
To protect the inverter from theft, you can lock inverter with a padlock. The padlock must meet
the following requirements:
Size:
A:6 mm – 8 mm diameter
B:23mm – 29 mm
C:23mm – 28 mm
D:39mm – 50 mm
E:13mm – 18 mm
Figure 4.9 Padlock for Anti-theft Protection
Installation of the padlock
Put the shackle of the padlock through the hole and close the padlock, as following picture.
Figure 4.10 Secure the Inverter with Padlock
To Next Page
Loading...
Need help?
General
