ER-180T Electronic Cash Register AU Operating Instructions • 17
Item(s) Registrations
All item(s) registration on ER-180T are made into preset and preset overridable Departments and
PLUs.
• Departments Registrations can be made by pressing the Department key on the keyboard.
• PLU Registrations can be made by entering the PLU number then PLU function key.
This system simplifies reporting by listing all items (regardless of how they are entered) on the
financial report.
To perform a item registration, need to turn control lock to REG-Mode if there is no specific
instruction given.
Department Registrations
As you make registrations, you can follow your entries by viewing the display. The digit marked
RPT counts items as they are repeated or multiplied.
In the following examples:
• Dept 1 is programmed for open entries, and is taxable by Tax 1.
• Dept 2 is programmed for open entries, and is taxable by Tax 2.
• Dept 3 is programmed with a preset price of $3.00, and is taxable by Tax 3.
• Tax 1 is programmed at 5%; Tax 2 is programmed at 10%,Tax 3 is programmed at 15%.
PLU (Price Look Up) Registrations
PLUs must be programmed before they may be operated. See “PLU Status Programming” to
program open or preset PLUs.
To Next Page
Loading...
Need help?
General
