ER-180T Electronic Cash Register AU Program Mode Programming • 61
Program 200 - PLU Price/HALO Programming
If a PLU is open, set the HALO (high amount lock out) here. If a PLU is preset set the preset price
here.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 2 0 0, press the SUBTOTAL key.
0 SBTL02
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Enter up to 500 of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 500
• Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last PLU number in the range; press the PLU
key.
PLU
Enter the PLU#,
up to 500
Enter the PLU#,
up to 500
PLU
4. If the PLU is open, enter a HALO of up to 7 digits. If the PLU is preset, enter a preset price.
X/TIME
Price/HALO
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
To Next Page
Loading...
