62 • Contents ER-180T Electronic Cash Register AU
Program 300 - PLU Descriptor Programming (Code Method)
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 3 0 0, press the SUBTOTAL key.
0 SBTL03
3. Enter PLU number you wish to program and press the PLU key,
PLU
Enter the PLU#,
up to 500
4. Enter 12 three character codes, then press X/TIME key. Please refer to the descriptor code
chart.
X/TIME
Enter up to 12
three-character codes
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
To Next Page
Loading...
