58 • Contents ER-180T Electronic Cash Register AU
Program 530 - Department Descriptor Programming (Code Method)
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 5 3 0, press the SUBTOTAL key.
0 SBTL 3 5
3. Select the Department you wish to program:
DEPT1.
4. Enter 12 three character codes, then press X/TIME key. Please refer to the descriptor code
chart.
X/TIME
Enter up to 12
three-character codes
5. To program additional Department, repeat from step 3, or press the CASH key to finalize
the program.
CASH
To Next Page
Loading...
