Sam4s ER-180T - Program 1300 - Date and Time Programming

ER-180T Electronic Cash Register AU Program Mode Programming • 81
Program 1300 - Date and Time Programming
Use this program to set the clock and calendar on your ER-180T. The date changes automatically.
After initial setting, time changing will probably be required only for beginning and ending daylight
savings time.
Programming the Date and Time
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 1 3 0 0, press the SUBTOTAL key.
0 SBTL0 3 1
3. Enter time in military standard time (based on 24 hours), must be four digits (i.e.
1300 hours = 1:00 PM); press the X/TIME key.
H H X/TIMEM M
4. Enter the date in MM (month) DD (day) and YY (year) format. Press the X/TIME
key:
M M D D X/TIMEY Y
5. Press the CASH key to finalize the program.
CASH