Sam4s ER-180T - Tax Programming

54 • Contents ER-180T Electronic Cash Register AU
Tax Programming
The Sam4S ER-180T Electronic Cash Registers has the capability to support four separate taxes.
Taxes can be calculated as either a straight percentage rate of between 0.001% and 99.999%, or a 60
break point tax table. Each tax may be either an add-on tax (added to the cost of a taxable item), or a
value added tax (VAT) that is included in the price of the item.
• The Default program is set to 10.000% VAT on Tax 1 and the description is set to
GST already.
• If you are entering a tax rate (add-on or VAT), see "Straight Percentage Tax Rate
Programming" to enter the percentage rate.
Important Note: After you have entered your tax program(s), test for accuracy by entering
several transactions of different dollar amounts. Carefully check to make sure the tax charged
by the cash register matches the tax on the printed tax chart for your area. As a merchant, you
are responsible for accurate tax collection. If the cash register is not calculating tax accurately,
contact your dealer for assistance.
Program 53 - Straight Percentage Tax Rate Programming
1. Turn the control lock to the PGM-Mode.
2. Press 5 3 and SUBTOTAL key.
3. If the tax is a percentage rate, with a decimal. (0.000-99.999). It is not necessary to enter
preceding zeros. For example, for 6%, enter 06.000 or 6.000.
4. For the type of tax:
If the tax is a percentage added to the sale (normal add on tax),
enter:
0
If the tax is a percentage value added tax (VAT; calculated as part
of the sale), enter:
2
5. Enter Tax No for the tax is programming.
6. Press CASH key to finalise the program.
X/TIME CASH
Repeat for each
S
y
stem Option
Decimal
Key
SBTL 3 5
.
Tax Kind
Tax No
EX.) AU standard Tax 1: Vat on 10.000%
5 3 + SUBTOTAL + 1 0 + DECIMAL + 0 0 0 0 2 + X/TIME +CASH