ER-180T Electronic Cash Register AU Program Mode Programming • 49
Program Mode Programming
Default Programming
• All keyboard Departments are Taxable, Preset and Override, without entry limits by
default status programming of "00000111".
• All keyboard PLUs are Taxable, Preset and Override, without entry limits by default
status programming of "00000111".
• All system options are set to 0 in default programming, unless otherwise noted. Change
only the options that will deviate from default programming. There is no need to re-enter an
option status of 0, since 0 is its original setting.
• All programming (unless otherwise noted) is done with the control lock in the P position.
Each section details a specific area of register programming.
• The Default program is set to 10.000% VAT on Tax 1 and the description is set to GST
already.
To Next Page
Loading...
