82 • Contents ER-180T Electronic Cash Register AU
Program 1600 - Machine Number Programming
The machine number is printed on the register receipt. Program a machine number so that any receipt can be
identified with the store or register where the transaction took place.
Programming the Machine Number
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 1 6 0 0, press the SUBTOTAL key.
0 SBTL0 6 1
3. Enter a machine number (up to 6 digits); press the X/TIME key.
X/TIME
4. Press the CASH key to finalize the program.
CASH
To Next Page
Loading...
Need help?
General
