Sam4s ER-180T - Program 350 - PLU Link Programming

ER-180T Electronic Cash Register AU Program Mode Programming • 63
Program 350 - PLU Link Programming
When a PLU is registered, the amount of the PLU is “linked” or reported to a department. The sale
amount of the PLU will be reported in for the appropriate PLU in the PLU report and also in the
department it is linked to.
Note: If a PLU is not linked to a Department, it’s sales will by default link to Department #1.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 3 5 0, press the SUBTOTAL key.
0 SBTL 5 3
3. Enter PLU number you wish to program and press the PLU key,
PLU
Enter the PLU#,
up to 500
4. Press a DEPARTMENT key on the keyboard you wish the PLU linked to
DEPT1.
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH