Samson 5824 - Table of Contents

Contents
EB 5824-2 EN
1 Safety instructions and measures ................................................................1-1
1.1 Notes on possible severe personal injury ......................................................1-4
1.2 Notes on possible personal injury ................................................................1-5
1.3 Notes on possible property damage .............................................................1-6
2 Markings on the device ..............................................................................2-1
2.1 Nameplate .................................................................................................2-1
2.2 Firmware versions .......................................................................................2-2
3 Design and principle of operation ...............................................................3-1
3.1 Fail-safe action ...........................................................................................3-2
3.2 Communication ..........................................................................................3-2
3.3 Additional equipment ..................................................................................3-3
3.4 Technical data ............................................................................................3-4
3.5 Dimensions in mm .......................................................................................3-8
4 Shipment and on-site transport ...................................................................4-1
4.1 Accepting the delivered goods .....................................................................4-1
4.2 Removing the packaging from the actuator ...................................................4-1
4.3 Transporting the actuator .............................................................................4-1
4.4 Lifting the actuator ......................................................................................4-1
4.5 Storing the actuator .....................................................................................4-1
5 Installation .................................................................................................5-1
5.1 Installation conditions ..................................................................................5-1
5.2 Preparation for installation ...........................................................................5-1
5.3 Aligning the travel indication scale ...............................................................5-1
5.4 Mounting the actuator .................................................................................5-2
5.4.1 Type5824:force-lockingattachment ............................................................5-2
5.4.2 Type5824:form-tattachment ....................................................................5-2
5.4.3 Type5825:force-lockingattachment ............................................................5-3
5.4.4 Type5825:form-tattachment ....................................................................5-3
5.5 Installing the control valve into the pipeline ...................................................5-3
5.6 Electrical connection ....................................................................................5-6
6 Operation ..................................................................................................6-1
6.1 Device overview and operating controls ........................................................6-1
6.1.1 Indication with LEDs ....................................................................................6-2
6.1.2 Direction of action switch .............................................................................6-3
6.1.3 Function switch ...........................................................................................6-5