Samson 5824 - Dead Band (Switching Range); Characteristic

EB 5824-2 EN 16-7
AnnexA(congurationinstructions)
16.5.5 Deadband(switchingrange)
The dead band determines how sensitive the actuator reacts. A change in the input signal by
thehysteresisrstcausesaminimallysmallchangeinthevalveposition.
Settings\Actuator\Travel
Function WE Adjustment range
Dead band (switching range) 2.0% 0.5to5.0%
16.5.6 Characteristic
The characteristic expresses the relation between the input signal and the actuator stem posi-
tion.
PerformthecharacteristicsettingsintheSettingsfolder(Actuator\Characteristic):