Samson 5824 - Operation Using Memory Pen

EB 5824-2 EN 8-5
Operation
8.4 Operation using memory
pen
uEB6661
The memory pen can be loaded with data
conguredinTROVIS-VIEWandthecong-
uration data transferred to one or several
devices of the same type and version.
Additionally, the data from the device can
be written to the memory pen. This allows
thecongurationdatatobesimplycopied
from one device and loaded onto other de-
vices of the same type and version.
The data logging function also allows oper-
ating data to be recorded.
On inserting a memory pen that is empty or
that contains data from another type of de-
vice or another version of the same device
into the serial interface port of the actuator,
the data from the actuator are uploaded to
the memory pen regardless of the status of
the memory pen and any other data on the
memory pen will be overwritten.
Note
LED blinking pattern for the memory pen
Memory pen actions and errors are indicated at the yellow LED on the actuator.
− Memory pen action completed
On
Off
Time in s
− Preparing to read data from memory
pen
On
Off
Time in s
− Preparing to write data to memory pen
On
Off
Time in s