Samson 5824 - Velocity

16-6 EB 5824-2 EN
AnnexA(congurationinstructions)
Settings\Actuator\Functions
Function WE Adjustment range
Idle time during end position guiding 0s 0 to 99 s
The further description refers to the operation with absolute travel adjustment, unless speci-
ed otherwise.
16.5.4 Velocity
The actuator stem moves to the position determined by the input signal at the selected strok-
ingspeed.Therearethreespeedlevels:
− Slow =0.135mm/s
− Standard =0.197mm/s
− Fast =0.365mm/s
Settings\Actuator\Travel
Function WE Adjustment range
Velocity Standard Slow, Standard, Fast
The transit time is calculated from the travel and the stroking speed. The transit time is the
time that the actuator stem needs to move through the adjusted travel.
The following
applies:
Transit time in s
=
Travel in mm
Stroking speed in mm/s
Note
Note