Samson 5824 - Operation; Positioner; LED Blinking Pattern

EB 5824-2 EN 8-1
Operation
8 Operation
After applying the supply voltage, the actuator is ready for use.
8.1 Positioner
The actuator stem's position directly follows the input signal.
8.2 LED blinking pattern
Explanations to the blinking pattern of the LEDs
The state of the corresponding
LED (on/off) is shown over time.
On
Off
Gray:LEDilluminated
White:LEDnotilluminated
Time in s
Blinking pattern of the yellow LED
− Device ON or communication in prog-
ress
On
Off
Time in s
− Stem position is relative
On
Off
Time in s
− Protecting against blockage
On
Off
Time in s