Samson 5824 - Page 9

EB 5824-2 EN 1-3
Safety instructions and measures
Referenced standards, directives and regulations
TheType5824andType5825ElectricActuatorswithaCEmarkingcomplywiththerequire-
ments of the Directives 2014/30/EU and 2014/35/EU.
TheType5824andType5825ElectricActuatorswithanEACmarkingcomplywiththere-
quirements of the Regulations TR CU 004/2011 and TR CU 020/2011.
TheType5824andType5825ElectricActuatorsaredesignedforuseinlowvoltageinstal-
lations.
Î For wiring, maintenance and repair, observe the relevant safety regulations.
Referenced documentation
Thefollowingdocumentsapplyinadditiontothesemountingandoperatinginstructions:
− Mounting and operating instructions of the valve on which the electric actuator is mount-
ed,e.g.forSAMSONvalves:
uEB5861forType3260Three-wayValve
uEB5863forType3226Three-wayValve
uEB5866forType3222GlobeValve
uEB5868forType3213andType3214GlobeValves
uEB8111forType3321GlobeValve
uEB8113forType3323Three-wayValve
uEB8131forType3531GlobeValveforHeatTransferOil
uEB8135forType3535Three-wayValveforHeatTransferOil