Service Manual
Alignment & Adjustments
4-4
Samsung Electronics
Exit Misfeed
1. Remove the remaining documents from the ADF.
2. Open the document input tray upward and pull the
document gently out of the DADF.
Since the machine, which has the ADF, has a fixed
document input tray, pull the misfeed document
under the document input tray.
3. Close the document input tray. Then place the doc-
uments back into the DADF.
Roller misfeed
1. Open the scanner lid.
2. Seize the misfed paper, and remove the paper
from the feed area by carefully pulling it to the right
using both hands.
3. Close the scanner lid. Then load the removed
pages back into the ADF.
To Next Page
Loading...
Need help?
General
