Service Manual
Alignment & Adjustments
4-8
Samsung Electronics
In the paper exit area
1. Press the release lever to open the side cover.
2. Open the front cover.
3. Pull down on the fuser lever. This will release pres-
sure on the paper.
4. Turn the Jam Remove Lever in the direction of the
arrow to move the paper to the exit area, then
gently pull the paper out through the exit area.
5. Push the fuser lever up.
6. Turn the Jam Remove Lever back to the original
position.
7. Close the front cover
and the side cover .
Printing automatically resumes.
To Next Page
Loading...
Need help?
General
