TEMI 880
8.3.Waiting Set
Click on “WAITING SET”’s pattern in Figure 19 to enter Waiting Set screen.
Waiting Set Screen
Figure 25
1 Wait SW.: selecting turn ON or OFF the waiting function.
2 Wait time: setting the waiting time.
3 Temp wait zone: setting the temperature range to start the waiting function.
4 Press wait zone: setting the Pressure range to start the standby function.
▶ “OR” Condition
Temp & Press PV does not reach the wait area before Wait Time.
▶
“AND” Condition
Temp & Press PV reach the wait area before Wait Time.
See 8.3.1 Wait Function Operation
To Next Page
Loading...