SanDisk Connect User Manual

SanDisk Connect™ Wireless Media Drive User Manual for iPhone, iPad, or iPod touch
47
4. Managing the Media Drive
Using the Power Button
!
!
!
!
!
4. Managing the Media Drive
!
!
Using the Power Button
!
!
!
Power Button
! Turns the Drive on and off
! Resets the Admin and Wi-Fi password
! Forces a hard restart to reboot an
unresponsive Drive
!
!
!
The power button performs three functions, depending on how long you hold in the
button.
!
Table 3: Using the Power Button
!
On/Off
Reset
Hard Restart
Press and hold for 3 seconds
to turn the Drive on and off.
Press and hold for 10 seconds to reset
Admin and Wi-Fi passwords to their
defaults:
• Admin default = “admin”
• Security default = no password
Press and hold for 25 seconds to
force a frozen Drive to restart.
!
!
Note: Resetting the Media Drive or forcing a hard start does NOT delete any content from
the Drive.
!
!
!
Managing Auto-shutdown
!
When the Media Drive is not connected to a power source, it automatically shuts
down after it’s been idle for 10 minutes. When you turn the Drive back on, it searches
for the strongest available Wi-Fi signal and connects to that network.
!
If the strongest Wi-Fi signal belongs to the Media Drive, there’s no need to do
anything further. But if it’s found another, stronger available Wi-Fi signal, you must
reconnect to the Drive.
!
1. Press the Media Drive power button for 3 seconds to restart it.
!
2. Go to Settings > Wi-Fi In your mobile device and select your Media Drive from the
list of available Wi-Fi networks.

SanDisk Connect Specifications

General

Simultaneous Connections	Up to 3 devices
App Support	SanDisk Connect app
Capacity	16GB, 32GB, 64GB, 128GB, 200GB
Wireless Connectivity	Wi-Fi 802.11 b/g/n
Mobile App Compatibility	iOS and Android
Weight	28 g (1.0 oz)
File Transfer	Wireless transfer via app