Sanremo Opera - A - Equipotential Connection

06-2017
8 / 12
OPERA
CAP. 4
Installation and connection
EN
Fig. 7
1
4.5.a - Equipotential connection
(if present) (Fig. 7)
This connection, required by some standards, prevents
differences in electrical potential between the grounds
of the devices installed in the same room.
Themachinespreparedforthisconnectionaretted
with the relevant terminal (1) located on the frame of
the machine.
• Connect an external equipotential connector of the
proper size to the relevant terminal (1), in compliance
with current regulations.
HAZARD
Machines that are not equipped with a
screw for the equipotential connection
cannot be installed in kitchens.