Sanyo PLC XU115 - XGA LCD Projector

55
Setting
Change the PIN code lock setting
UsethePoint◄►buttonsto
switchbetweentheoptions.
UsethePoint◄►buttonstoselectOff,On1,orOn2and
then movethe pointer to “Quit” with the Point ▼ button.
PresstheSELECTbuttontoclosethedialogbox.
Change the PIN code lock setting
Enter a PIN code
Use the Point ▲▼ buttons to enter a number. Press the
Point►buttontofixthenumberandmovetheredframe
pointertothenextbox.Thenumberchangesto“.”Ifyou
fixedanincorrectnumber,usethePoint◄buttontomove
the pointer to the number you want to correct, and then
enterthecorrectnumber.
Repeatthissteptocompleteenteringafour-digitnumber.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECTbutton so that you can start to
operatetheprojector.
IfyouenteredanincorrectPINcode,“PINcode”andthe
number () will turn red for a moment. Enter the
correctPINcodealloveragain.
Enter a PIN code
AfteracorrectPINcodeis
entered,thefollowingdialog
boxappears.
The PIN code can be changed to your desired four-
digit number. Press the Point ▼ button to select “PIN
code change” and press the SELECT button. The New
PINcodeinputdialogboxappears.SetanewPINcode.
Change the PIN code
Change the PIN code
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE
PIN CODE NO. MEMO ON PAGE 76, AND KEEP IT
SECURELY. IF YOU FORGET YOUR PIN CODE, THE
PROJECTOR CAN NO LONGER BE STARTED.