To cancel color correction settings (return to the initial settings)
œ Follow steps 1 and 2, select the ú icon, and press the SET button. (The
settings in icons ô to n will be retained.)
œ If the Real Color Equalizer on PC application (in the provided CD-ROM
[Sanyo Software Pack]) is used to change the colors (see page 118) and
results in extreme values for the camera’s color settings, accurate color
adjustment may not be possible. It is recommended that when adjusting the
colors using the Real Color Equalizer on PC you set the camera’s color
adjustment setting to “DEF” (initial setting, color adjustment off), or set the
hue and saturation values close to 0 and photograph the images without
extreme settings.
œ Setting data is prestored in color adjustment icons ô to n. After
overwriting these settings with your custom settings, you can reset the
settings to their original values by loading them from the provided CD-ROM
(Sanyo Software Pack). The settings data is in the Setting data folder within
the Real Color Equalizer folder.
Icon Title Settings data file name To photograph
ô (None) sancam01.cfg Color tone adjustment off
ö MONOCHROME sancam02.cfg Monochrome
õ RED sancam03.cfg Red only generated
m MOUNTAIN sancam04.cfg Mountain scenes, etc.
n SEA sancam05.cfg Marine scenes, etc.
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
116
To Next Page
Loading...
Need help?
General
