ADDING TEXT
HINT
You can change the color of the text
1
Before entering text, press [d] to select the color palette located to
the left of the characters on the character row.
2
Turn the jog dial to select the color for the text.
œ Turning it clockwise cycles through the available colors as shown below.
Turn it counterclockwise to change colors in the reverse order.
œ This completes the text color selection.
œ Press [c] and enter the desired text.
œ By selecting the color palette and pressing the SET button, you can
change the color of all the characters at one time.
7
Press [d] or [c] on the arrow button
to select the character to enter.
[ú]: Select this when you want to
choose the color for a character
(color palette).
(Blank space): Select this to enter a
space. ú appears in
the character position.
[j]: Select this to move back one
space (delete one character).
[<]: Select this when you have
finished entering the desired text.
8
Press the SET button.
œ The selected character is entered on the text line.
œ Repeat steps 6 to 8 to continue inputting characters. You can enter up
to 12 characters, provided that the first character entered (in step 4 is
set at the leftmost edge of the screen).
White Yellow
→→
Orange
→
Red
→
Purple
→
Green
→
Blue
→
Dark blue
→
Gray
→
Black
→
SCROLL
SELECT
PQRST <
P
Color palette End
Select to enter a space
[j]
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
131
To Next Page
Loading...
