Sanyo VPC-MZ2EX User Manual

Problem Cause Action
Reference
page
Shooting
Accessing
indicator lights
red.
Recorded data is
being saved on the
card.
Not a malfunction.
Wait until the
accessing indicator
turns off and the
standby indicator
lights green to
capture the image.
—
The flash does
not operate.
The flash off mode
is selected.
Set the flash to
automatic flash
mode or forced
flash mode.
72
The shooting mode
is set to a mode
other than the still
image shooting
mode.
Set the camera to
the still image
shooting mode. 57
The digital camera
has determined
that the image is
bright enough and
the flash is not
necessary.
Not a malfunction.
Capture the image;
the digital camera
will determine
when the flash is
necessary.
—
The batteries are
dead.
Change or
recharge the
batteries.
25, 31
AE shift
sequential shots
cannot be
selected.
The exposure
setting is set to
manual Í.
Set the exposure
to a setting other
than manual.
99
The exposure of
captured images
in the AE shift
sequential shots
did not change.
The exposure did
not change due to
the function
parameters.
The exposure may
not change due to
the surrounding
brightness. This is
not a malfunction.
—
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
182

Sanyo VPC-MZ2EX Specifications

General

Brand	Sanyo
Model	VPC-MZ2EX
Category	Digital Camera
Language	English