Sartorius Cubis Series Operating Instructions

Getting Started
Balance with Draft Shield
t Remove the packages (containing draft shield panels, weighing pan, pan
support, AC adapter, etc�) from the lower packaging and place them to one
side�
t Use both hands to lift the balance out of the packaging�
3
Exercise caution to avoid glass breakage�
Never lift the equipment by the draft shield panels to remove it from the
packaging�
t Place the balance on an even surface�
Balance with No Draft Shield
t Use both hands to remove the model without a draft shield from the
packaging�
t Remove the AC adapter and the balance parts from the packaging�
10 Cubis MSE Operating Instructions

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model