Sartorius Cubis Series Operating Instructions

Application Programs
58 Cubis MSE Operating Instructions
Totalizing
Display symbol: +
Purpose
This application can be used to add values from successive, mutually independent
weight values to a total that exceeds the capacity of the balance�
Features
– Totalizing memory for up to 99 products
– Save component weights (“Store xx comp�”), with automatic printout
– Toggle display between the current individual weight value and the value in
totalizing memory by pressing S�
– Print the total of the individual component weights S-Comp)
– To close the application and print the total weight:
press F
Preparation
§ Select the “Totalizing” application in the menu:
See “Configuration”
§ Configuring parameters:
Applic. Application programs
Total Totalizing
Comp.Prt. Printout of components
Off
o On
o = Factory settings
Printout: Totalizing
Comp 2+ 278.1 g : Second component weight
S-Comp+ 2117.5 g : Totalizing memory

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model