Sartorius Cubis Series Operating Instructions

Getting Started
Connecting Electronic Devices (Peripherals)
t Make absolutely sure that the device is unplugged from the power supply
before connecting/disconnecting any peripheral device (printer, scanner, PC) to
or from the data port�
3
A device connected to the power supply should never be opened�
Anti-theft Locking Device (Accessory)
Balances with a readability of ≤ 0�01 mg
t An anti-theft locking device can be installed to the back of the balance if
required�
Balances with a readability of ≤ 1 µg
To fasten an antitheft locking device, use the lug located on the back of the weigh
cell�
20 Cubis MSE Operating Instructions

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model