Sartorius Cubis Series Operating Instructions

Configuration (Operating Menu)
Cubis MSE Operating Instructions 37
Menu Structure (Overview)
Level 1 Level 2 Level 3 Info about Menu Level
1) Setup Bal.Scal. Ambientconditions 1� 1� 1�
Balance parameters App.Filt. Application filter 1� 1� 2�
Stab.Rng. Stability range 1� 1� 3�
STABILDLY� Stability delay 1� 1� 4�
Tare
1
) 1� 1� 5�
AutoZer. Auto zero 1� 1� 6�
Wt.Unit Basic weight unit 1� 1� 7�
DISP.DIG. Display accuracy
1
) 1� 1� 8�
Cal./ADJ. Function of the C key 1� 1� 9�
Cal.routine 1� 1� 10�
Zero rng. Zero range 1� 1� 11�
INIT.ZERO Zero at Power On 1� 1� 12�
ON TARE Tare/zero at Power On 1� 1� 13�
CYC.rate Output rate 1� 1� 14�
ISOCAL Autom� calibration/adjustment 1� 1� 15�
EXT.Cal. External adjustment 1� 1� 16�
Cal.Unit Weight unit for calibration
1
) 1� 1� 17�
GEN.SERV. General Service MEN.RESET Factory settings 1� 9� 1�
2) DEVICE extras Menu Menu read only/can edit 2� 1� 1�
(Additional functions) Signal Acoustic Signal 2� 1� 2�
Keys (Keypad) 2� 1� 3�
Ext.Key External switch function 2� 1� 4�
On Mode Power-on mode 2� 1� 6�
DR.SHIELD 2� 1� 9�
RE.DR.SH Resolution, draft shield open 2� 1� 10�
IONIZER 2� 1� 11�
LEVEL 2� 1� 12�
LEVELING 2� 1� 13�
PERIPHER. DAT.REC. Communication mode 2� 2� 1�/2� 3� 1�
(25-pin “Peripherals” interface) Baudrate 2� 2� 2�/2� 3� 2�
parity Parity 2� 2� 3�/2� 3� 3�
pc-usb (USB port “PC”) Stopbit Number of stop bits 2� 2� 4�/2� 3� 4�
Handshk. Handshake mode 2� 2� 5�/2� 3� 5�
Databit Number of data bits 2� 2� 6�/2� 3� 6�
3) DATA OUT COM.SBI Communications output 3� 1� 1�
(data output (PC communication) Stop automatic output 3� 1� 2�
Aut.Cycl. Time-dependent automatic data output 3� 1� 3�
Format (Line format) 3� 1� 4�
Auto.Tare Autom� taring after data output 3� 1� 5�
PRINT.PARA for printing RES.olution (manual/automatic) 3� 2� 1�
Format Line format for printout 3� 2� 2�
Prt.Init. Printout of appl� parameters 3� 2� 3�
GLP ISO/GLP-compliant printout 3� 2� 4�
tar./prt. Tare bal�/scale after ind� print 3� 2� 5�
time: 12h/24h 3� 2� 6�
date format 3� 2� 7�
4) Applic. Application programs Weigh 4� 1�
Unit Toggle 4� 2�
Counting resolut. 4� 3� 1�
Ref.Updt.Automatic Reference updating 4� 3� 2�
percentweighing Dec.Plcs Decimal places 4� 4� 1�
net.tot. Net total Comp.Prt. Printout of components 4� 5� 1�
Total Totalizing Comp.Prt. Printout of components 4� 6� 1�
AnimalW. Animal weighing Activty. Animal activity 4� 7� 1�
start 4� 7� 2�
Calc. Calculation Method (Operator) 4� 8� 1�
Dec.Plcs Decimal places 4� 8� 2�
Density determination Dec.Plcs Decimal places 4� 9� 1�
5) Input Input ID. ID input; max� 7 characters 5� 1�
Date Set date 5� 2�
Time Set time 5� 3�
password Password entry (for Service) 5� 4�
Cal.wt.. Enter weight value 5� 5�
6) InFoInformation Version, Ser. nr. , model,
Display software version, serial no�, model 6� 1� to 6� 6�
lobs, kdc vers, DR.Shield, if OPT�MOD
7) Language English (factory setting) 7� 1�
(Language) Deutsch (German) 7� 2�
franc.çais (French) 7� 3�
ital.iano (Italian) 7� 4�
Espanol (Spanish) 7� 5�
(Russian) 7� 6�
Polski (Polish) 7� 7�
8) opt.MOD (optional interface) 8� 1� to 8� 6�
1
) Not available on balances verified for use in legal metrology

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model