Sartorius Cubis Series Operating Instructions

Application Programs
Cubis MSE Operating Instructions 57
Example: Counting parts into a container
Parameter configuration: Applic. - Net.totl.
Step Press key Display/Printout
1� Place empty container
on the balance 65.0 g
2� Tare J 0.0 g
3� Add first component + 120.5 g
4� Save component data V + 0.0 g
Net
Comp 1+ 120.5 g
5� Add next component + 70.5 g
Net
6� Save component data V + 0.0 g
Net
Comp 2+ 70.5 g
7� Weigh further components as desired Repeat steps 5 and 6
as often as necessary
8� Fill to desired final value S + 191.0 g
(toggle to the total weight value)
9� Print total weight and delete F + 2117.5 g
the component memory T-Comp+ 2117.5 g

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model