Sartorius QC7CCE-D - External standard calibration weights:

Painted drive-on ramp:
1200 x 800 mm (L x W) YAR01IWA
Stainless steel drive-on ramp:
1200 x 800 mm (L x W) YAR05IWA
Set of stainless steel floor fasteners
(2 fastening plates,
4 special dowel screws) YFP01I
External standard calibration weights:
For models: Accuracy class Weight Order no.
(OIML R111) in kg
QC7CCE-S F1 1 x 5 YCW 654-00
QC34EDE-S F1 1 x 10 YCW 713-00
QC64EDE-S F1 2 x 10 YCW 713-00
QC5DCE-S ±25 mg 1x 5 YSS 653-00
QC7DCE-S ±25 mg 1 x 5 YSS 653-00
QC7DCE-D ±25 mg 1 x 5 YSS 653-00
QC15DCE-S ±25 mg 1 x 5 YSS 653-00
QC35EDE-S F1 1 x 10 YCW 7138-00
QC35EDE-D F1 1 x 10 YCW 7138-00
QC35EDE-P F1 1 x 10 YCW 7138-00
QC60FEG-S** F1 2 x 10 YCW 7138-00
QC65EDE-D** F1 2 x 10 YCW 7138-00
QC65EDE-S** F1 2 x 10 YCW 7138-00
QC150-FEG-S** M1 1 x 50 YCW 7559-00
** Sartorius offers you external calibration service for your equipment.
5–11