BalanceReader software YAK10 PC-0002*
for collecting data that are transmitted by your Sartorius
balance to a commercially available personal computer.
These data are read into spreadsheets and stored. The stored
spreadsheets can be further processed using commercially
available standard software (Excel, Lotus 1-2-3, etc.).
This applications kit includes the following software
and equipment:
– 3
1
⁄2” and 5
1
⁄4” program diskettes
– program description
– interface cable
– adapter (25-pin to 9-pin)
SartoWedge data transfer software program incl. YSW01*
connecting cable (scale/PC)
enables you to have data, recorded by your Sartorius
scale/balance, input directly into any application program
you are running on your PC (DOS or Windows).
Universal remote control switches with menu code definable
p/p key, =/z key, g/W key, o/t key, u/w key,
z/T key, S/a key functions, (selectable in the operating menu)
Foot switch 7223*
Foot switch with T-connector YPE 01Z*
Hand switch with T-connector 7226*
T-connector 7258*
Rolls keeping device with 7 rolls (for QC34/64) YRT01IB-0001
Display holder for table installation
(max.1.5 m/59 inches distance to the scale) YDH 01TS
IP 65-protected AC table adapter
(3 m/118 inches primary cable,1.5 m/59 inches
secondary cable) 6971899
Below balance weighing device YSH 01IB
(only for models QC34EDE-S and QC64EDE-S)
For further information about the use of your scale and/or the spare parts, please
contact one of our local Sartorius service center, office or dealer.
* Only in combination with adapter cable YCC01-0016M3
5–12
To Next Page
Loading...
