Data output with data and time
The data output ID is different for each printer.
“Data Printer” can output the article no. (ID) with the date and time.
The industrial printer only prints the article no. (ID).
You can vary the data on the printout by changing the respective menu settings:
Code YDP03-0CE Printer YDP01IS-0CE Printer
7 4 1 No output No output
7 4 2 Output date/time Form feed only
7 4 3 Output article no. (ID) Output article no. (ID)
7 4 4* Output date/time Output article no. (ID)
and article no. (ID) and form feed
Printout/Record Header (Your Company Name)
You can enter information in the first and second header lines to identify the
data that is output by your scale. This information can be entered through an on-
line computer, or by a Sartorius service technician. The on-line computer can
also receive data from the scale. By connecting a printer, you can print the data
received in the computer. These data are saved in non-volatile memory. They are
printed out together with each data output. For more information, see the section
entitled “General Description of the Data Interface”.
Output of1st and 2nd headers Code Changes
No output 7 5 1
Output first header only 7 5 2
Output second header only 7 5 3
Output both headers 7 5 4 *
*= factory setting
2–14
To Next Page
Loading...
Need help?
General