Practical Example: Changing the Reference Sample Quantity Using the
0 –9 Numeric Keys
You are working in the Counting application, with a reference sample quantity
of 10 pieces.
Step/Key Display Data Output
Remove the10 pieces from
the container and place the
empty container back on
the weighing pan.
0.0 gcs
Before placing any more
pieces in the container,
you want to change the
reference sample quantity.
Enter the new reference
sample quantity using the
0–9 numeric keys,
e.g. 20 pieces.
20 pcs
Place 20 pieces in the
container and press
u/w (12) to re-start the
counting application.
20 pcs
The reference sample quantity has now been changed to 20 pieces.
3–12
To Next Page
Loading...
