Satec PM135EH User Manual

Chapter 5 Configuring the PM135 Configuring Meter Security
98 PM135 Powermeter Series
Using PAS
Ensure that the On-line button on the PAS toolbar is checked, select
Administration from the Monitor menu, and then select Change
Password -> Password 1.
Figure 5-15: Password Setup Dialog Box
To change the password:
1. Type in a new 4-digit password
2. Repeat the password in the
Confirm new password box
3. Check Enable password
protection to enable password
checking
4. Click Send.

Satec PM135EH Specifications

General

Brand	Satec
Model	PM135EH
Category	Measuring Instruments
Language	English