Satec PM175 User Manual

Chapter 3 Display Operations
Data Display
36
Series PM175 Powermeters
Common Measurements (Main Display)
6
Ph.L1
PF
kW/MW
Phase L1 powers
(if enabled)
7
kVA/MVA
Ph.L1
kvar/Mvar
Phase L1 powers
(if enabled)
8
Ph.L2
PF
kW/MW
Phase L2 powers
(if enabled)
9
kVA/MVA
Ph.L2
kvar/Mvar
Phase L2 powers
(if enabled)
10
Ph.L3
PF
kW/MW
Phase L3 powers
(if enabled)
11
kVA/MVA
Ph.L3
kvar/Mvar
Phase L3 powers
(if enabled)
12
H01
PF
kW/MW
Fundamental total powers
(if enabled)
13
H1.L1
PF
kW/MW
Fundamental phase L1 powers
(if enabled)
14
H1.L2
PF
kW/MW
Fundamental phase L2 powers
(if enabled)
15
H1.L3
PF
kW/MW
Fundamental phase L3 powers
(if enabled)
16
An.In
AI1
AI2
Analog inputs (optional)
Min/Max and Max. Demands Display
Press the MIN/MAX button. The MIN/MAX LED, or MAX
DEMAND LED in the PM175, is illuminated when in the
MIN/MAX display. Use the UP and DOWN arrow buttons to
scroll through the Min/Max and Max. Demand pages.
Note that volts readings are line-to-neutral in 4LN3, 3LN3 and
3BLN3 wiring modes, and line-to-line in other modes.
Min/Max and Maximum Demands
1
Lo
V1/V12
V2/V23
V3/V31
Minimum volts
2
Lo
I1
I2
I3
Minimum amps
3
Lo
kVA/MVA
PF
kW/MW
Minimum total VA
Minimum total PF (absolute)
Minimum total W
4
Lo
In
Hz
kvar/Mvar
Minimum neutral current
Minimum frequency
Minimum total var
5
Hi
V1/V12
V2/V23
V3/V31
Maximum volts
6
Hi
I1
I2
I3
Maximum amps
7
Hi
kVA/MVA
PF
kW/MW
Maximum total VA
Maximum total PF (absolute)
Maximum total W




MIN
MAX

Satec PM175 Specifications

General

Brand	Satec
Model	PM175
Category	Measuring Instruments
Language	English