Satec PM175 User Manual

Chapter 4 PAS Application Software
Configuring Recorders
Series PM175 Powermeters
93
7. Select the number of cycles to be recorded prior to the
event, and a total number of cycles in the waveform.
8. Add the name for your waveform log file in the “Name”
box. It will appear in the waveform reports.
9. To select the AC channels, click on the Channels button,
check the boxes for channels you want to be recorded,
and then click OK.
10. Save your waveform setup to the device database, and
send it to the meter.

Satec PM175 Specifications

General

Brand	Satec
Model	PM175
Category	Measuring Instruments
Language	English