SATO CX400 - Rotated Fields

Section1. Programming Concepts
SATO CX400 PN 9001106 Rev. A Page 1-7
The image is moved horizontally to the right 2 inches (406 dots) so that itcan be printed on a 2
inch wide label. For more information, see the Base Reference Point command description.
ROTATED FIELDS
The CX400e printer can rotate each print field in 90° increments using the Rotate command.
• <ESC>% - The field rotates, but the base reference point for the field remains the same.
The following data stream will rotate the print field but will not change the base reference
point of the field:
4.1”
4.1”