Section 5. Configuration Commands
SATO CX400 PN 9001106 Rev. A Page 5-7
Print Darkness Range
COMMAND STRUCTURE <ESC>CDaaa,bbb
aaa = Darkness range adjust (0 to 400)
Media adjustment (0 to 6000)
Example: <ESC>CD250,3000
Placement: This command should be sent in a separate data
stream.
Default: CD200,3300
COMMAND FUNCTION To make fine adjustments for best print quality.
INPUT TO PRINTER <ESC>A
<ESC>CD200,3300
<ESC>Z
PRINTER OUTPUT There is no printer output as a result of this command.
SPECIAL NOTES 1. This setting is stored in non-volatile memory and will not change until a
new Print Darkness Range command is received.
2. The current Print Mode can be verified by printing a Test Label.
3. It is recommended that a bar code verifier be used when making
adjustments with this command.
To Next Page
Loading...
