Section 2: Command Codes
SATO CX400 PN 9001106 Rev. A Page 2-47
Print Position
COMMAND STRUCTURE Horizontal Position <ESC>Haaaa
Vertical Position: <ESC>Vbbbb
aaaa
=
Number of dots horizontally from the base
reference point (1 to 832
bbbb = Number of dots vertically from the base
reference point (1 to 8120)
Example: <ESC>H0020<ESC>V0150
Placement: Preceding any printed field description of lines/
boxes, fonts, bar codes or graphics.
Default: <ESC>H0001
<ESC>V0001
COMMAND FUNCTION The Horizontal and Vertical commands specify the top left corner of a field
or label, using the current base reference point as an origin. They also
establish a reference point for subsequent fields until the next horizontal
and/or vertical print position command is issued.
INPUT TO PRINTER <ESC>A
<ESC>H0025<ESC>V0050<ESC>L0303<ESC>MSATO
<ESC>H0100<ESC>V0150<ESC>MSATO
<ESC>Q2<ESC>Z
Printer Output
To Next Page
Loading...
