SATO CX400 - Memory Area Select

Section 3: Expanded Memory Commands
SATO CX400 PN 9001106 Rev. A Page 3-9
Memory Area Select
Command Structure <ESC>CCa
a = Memory Area
1 = 512K internal flash ROM
2 = 2M/4M expanded memory
Example: <ESC>CC1
Placement: Immediately following the <ESC>A Start Code.
Default: Last selected Memory Area.
Command Function Selects the Memory Area to be used for following Expanded Memory
commands.
Printer Input <ESC>A
<ESC>CC1
{commands}
<ESC>Z
Printer Output There is no printer output as a result of this command.
Special Notes 1. To use this command with CC2 requires the Expanded Memory
option. See your SATO representative for more information.