SATO CX400 - Graphics, Custom Store

Section 3: Expanded Memory Commands
Page 3-4 PN 9001106 Rev. A SATO CX400
Graphics, Custom Store
Command Structure <ESC>GIabbbcccddd{data}
a
bbb
ccc
ddd
{data}
=
=
=
=
=
Specifies character format of the data
H Hex data
B Binary data
Number of horizontal 8 x 8 blocks (001 to 104)
Number of vertical 8 x 8 blocks (001 to 178)
Graphics storage number (001-999)
Hex or binary data to describe the graphic image
Example: See Appendix C for detailed information on creating
Hex and Binary graphic files.
Placement: Immediately following the <ESC>CC Memory Area
Select command.
Default None
Command Function To provide similar functionality to the <ESC>G Custom Graphic
command, but allows for the graphic image to be stored in Expanded
Memory. Use the Store command to send the graphic data to the
printer, which is held in the optional Expanded Memory, even if printer
power is lost.
Printer Input <ESC>A
<ESC>CC1<ESC>GIH002002001
0100038007C00FE01FF03FF87FFCFFFE07C007
C007C007C007C007C007C007C0
<ESC>Z
Note: See SATO Programming Reference:Appendix C, PN 9001096 for
detailed explanation on how to format a graphics data stream.
Printer Output There is no printer output as a result of this command. See <ESC>GR
Recall Custom Graphics command.