SATO CX400 - Custom Protocol Command Codes Download

Section 5. Configuration Commands
Page 5-4 PN 9001106 Rev. A SATO CX400
Custom Protocol Command Codes
Download
COMMAND STRUCTURE <ESC>LD,a,b,c,d,e,f,g,h,i
a
b
c
d
e
f
g
=
=
=
=
=
=
=
Replacement character for STX
Replacement character for ETX
Replacement character for ESC
Replacement character for ENQ
Replacement character for CAN
Replacement character for NUL
Replacement character for OFFLINE
jj =
Hexadecimal code for Eurocharacter
Example: <ESC>LD,{,},%,#,&,*,~
Placement: Immediately following the <ESC>A Start command and
in an independent data stream.
Default: Standard Protocol command Codes
COMMAND FUNCTION Allows the user to defines custom Protocol Command codes.
PRINTER INPUT <ESC>A
<ESC>LD,{,},%,#,&,*,~
<ESC>Z
PRINTER OUTPUT A Protocol Command code status label will be printed as a result of the a
successful download of a custom set of Protocol Command codes.