ScanMeg SIM-P - Enable;Disable Cell Cancellation

ScanMegInc.     ModuleSIM‐P

UserManual  29   Version1.3

TheEnable/Disablestate
Whenacellcancellation commandis executed,alistofthecancelledcellsiskeptinmemory.When
Cancellation is enabled, cells present in the list in memory are cancelled. When this  function is in
Disabledstate,thelistisstillthere,butnocellsarecancelled.
Thispermitsonetotestallofthecells
inthephotocellwithoutlosingthestateofthecancelledcells.Atanytimeyoucanenablethem.The
Enable/DisablestateistheequivalentoftheSetorResetfunctionbutwithoutanyupdateorreset
ofthecancelled
list.


