Scanreco G5 Rocket Flex System User Manual

The G5 Rocket Flex Transmitter comes in the following versions:
G5 RF 14
G5 RF 14 Display
Model Button conguration
G5 RF 14A 12x2-step, 2x1-step pushbuttons
G5 RF 14B 14x1-step pushbuttons
G5 RF 14E 14x2step pushbuttons
G5 RF 14A Display 12x2-step, 2x1-step pushbuttons
G5 RF 14B Display 14x1-step pushbuttons
G5 RF 14E Display 14x2-step pushbuttons
5.2 Versions
5.3 Functionality
The G5 Rocket systems are normally delivered with the default settings. Default start button
is button number 7(red stop button must be released) and default stop button is button
number 8 or the red stop button. Button number 1-6 has a momentary activation of output
1-6 (button 9-14 are not mapped to any output). If any other functions are required they
need to be congured prior to operation. The pushbuttons are easily programmed to activate
any output or function. Button denitions include momentary, interlocked or latched output.
Please have a look at chapter 15 if any description of the functionality is declared.
There are two ways of conguring the functionality. With On-Site programming or with WinSCI
software. Neither of them are described in this manual as it is intended for the installer and
end user. Please contact Scanreco in case of programming is required.
Another Pocket or Rocket transmitter can be congured to work as a repeater to extend the
working range. Please contact Scanreco in case of repeater function is required.
12/33

Scanreco G5 Rocket Flex System Specifications

General

Brand	Scanreco
Model	G5 Rocket Flex System
Category	Remote Control
Language	English