6 G5 Receiver
6.1 Product description
The G5 Receiver is manufactured in plastic and is provided with contacts for connection of
power supply and electro-hydraulic valves. Depending on the version the G5 Receiver can
either be equipped with MOSFET outputs/inputs and Deutsch connectors, relay outputs
with spring terminal block or CAN-Bus output.
Since the Receiver can be exposed to very tough environments, the box is encapsulated to
give protection from damp, heat, cold, dust, vibration and corrosive environments.
The Receiver has short circuit proof inputs and outputs and has protection against
polarity reverse, over-voltage, large incoming voltage transients and electromagnetic and
radio interference.
Label
16/33
To Next Page
Loading...
Need help?
General
