Schaerer Barista - Beverage Dispensing; Beverage Interruption

25
Schaerer Barista operating instructions
Operation | Beverage dispensing
3.4 Beverage dispensing
Pressing on the beverage buttons starts dispensing
of the set beverages.
A suitable portalter must be inserted.
The portalter must be empty.
The previous beverage dispensing process must
be completely nished. This can be reported with a
signal tone. The signal tone can be deactivated.
• Illuminated eld = Ready for dispensing
• Non-illuminated eld = Not ready for dispensing/
eld locked
• Flashing eld = Beverage is dispensed
* Adjust the cup grid to the correct height
* Set a beverage container of a suitable size below
the inserted portalter
* Press on the desired beverage button.
The coffee beans will be ground directly into the
portalter. The coffee grounds will be automatically
tempered with the brewing piston.
Beverage dispensing starts.
Beverage interruption
* Tap on the ashing beverage button again
Button functions
w Software
w Change recipes
page 39
Café Crème
2
2 Espresso Espresso Lungo
DI_01_01_01_00